West Wings Hawker Hunter EDF - A-WW33
Byggesett av den mest kjente engelske jetjager Hawker Hunter.
West Wings har laget en modell som er så nær skala som praktisk mulig og fremdeles rask og enkel å bygge.
Kroppen er bygd opp av 2mm bjerkfiner spant som er CNC-kuttet med hull for redusering av vekt. Meget elegant gjort.
Vakumformede luftinntak, cowling, luker, airbrake etc.
For 3-kanals radio med 3 stk miniservoer og børsteløs motor.
En nytelse i luften.
- vingespenn: 707 mm
- lengde: 980 mm
- skala 1:14,5
CNCskåret balsadeler, bjerkfiner og lister, 13 stk vakumstøpte deler som luftinntak, cowling, luker, airbrake, deksler etc, cockpitglass, dekaler, flotte fullskala tegninger med skisser for montering og tekst samt byggebeskrivelse.
Produsert i England
Vi leverer alt av radio og motorutstyr samt betrekning på forespørsel.
This model in the West Wings range re-creates the most famous British jet fighter of them all. The Hawker Hunter is arguably one of the most attractive jets ever built and we’ve gone to great lengths to retain that ‘character’ in our kit. We have tried to keep the design as close to scale as possible, with the only deviations being made on the basis of necessity.
The design of the fuselage looks complex at first glance, but is actually very simple and quick to build. The fuselage formers are made from 2mm birch ply and are accurately cut on our CNC machine to give strength where required and reduced weight where possible, and because of their rigidity, ‘thinness’ and weight saving cutouts, the building process is less prone to mishaps. The forward ‘Vac-Formed’ inlet ducts are easy to install and have been carefully designed to provide maximum performance with the minimum of drag. We spent a lot of time getting this area right!! The inlets are of course ‘over-scale’ in size, but only as much as is necessary to feed the fan with the correct amount of air. Only the ‘purists’ are likely to know!! The fuselage is sheeted in 1.5mm (1/16th) balsa and is surprisingly easy and quick to do.
Wings are conventional in construction and the section chosen is particularly suited to this scale plan-form and the projected flight envelope. The characteristic ‘sawtooth’ leading edge is incorporated and the scale anhedral helps prevent ‘Dutch Rolling’ in this swept wing design. A small amount of ‘washout’ is also built in for low speed stability.
The tail area is very slightly over scale, as a result of flight-testing, yet is not obvious to the eye. The fin has a simple built-up structure and is amazingly rigid when assembled.
For the scale-orientated modeller, we’ve included vacuum formings for the air brake and forward cannon shell clip collectors. The choice of colour schemes is the standard camouflage of 74 Sqn RAF and a full set of decals are supplied. The outlet nozzle is for the non ‘brake-chute’ version but could be easily modified.
Flight performance can be ‘sedate’ if you use a good ferrite motor (Speed 480 Race etc) and 8 cells (Sanyo CP1700’s recommended), right up to ‘ballistic’with a brushless motor like the Kontronik Fun 480/33 and 10 cells. A good compromise we have found is the Irvine Cobalt 480 9-turn and 10 x KAN2000 Ni-mh cells (4/5SC Size). We used this in our prototype and found it to be very good in combination with a Jeti 030 speed controller. Our prototype used the Wemotec 480 Mini Fan but the Wattage Fan unit can also be used and is catered for in the kit. The battery pack is significant in the overall weight of the model and you should make a careful choice, bearing in mind capacity, cell size/weight and ability to deliver high current. The design will accommodate a wide variety of cell types by positioning the pack accordingly. We recommend the latest 4/5SC size cells as a good starting point, the number being dictated by the requirements of the motor/speed controller. Please bear in mind that this model is designed to be ‘bungee’ launched and it’s static thrust will be insufficient to even attempt hand launching unless using the top end motor/cell combination.
You will need three small servos (around 9g), two of which, should be no more than 9mm thick. The wing thickness will only accommodate servos of this size but there are many to choose from in this category at reasonable prices. We used Sanwa SX-091’s, which worked well. The receiver is less important but the lighter the better. She can be flown on three or four channels. Four channel versions allow fine tuning of the ailerons by mixing two channels together but this is not really necessary.
Flight characteristics are similar to many high-performance, high load models on the market today. Not a beginners model, but fine for the moderately experienced pilot that is used to fast, small models. It’s a sleek design and bleeding the speed off for landing requires a reasonably long approach at low level. Like all swept-wing, jet style models, high ‘G’ low speed turns should be avoided. Just fly her like a jet in wide sweeping manoeuvres and you’ll be rewarded with a stunning performance. Everybody that has seen her fly seems to love her.
If you’re looking for a great EDF model (maybe your first), then the West Wings Hawker Hunter is a perfect choice.
VED POSTORDREKJØP HAR DU 14 DAGERS ANGREFRIST FRA VAREN HENTES.
FOR MER INFORMASJON OM KUNDERETTIGHETER, KLIKK HER
Teknisk Hobby AS, Postboks 9, 4889 Fevik
|Skriv inn ditt søkeord her:
Hawker Hart Friflukt
Motor Starter Stick
Bensin og dieselslange
7,2V 3000 mAh Ni-MH
Epoxy rep. sett
Liquid Gravity ballast
RC Modellers glue
60-min epoxy 224gr
20-min epoxy 224gr
5-min epoxy 250gr
Liteply 3,2 mm
Factory Pro Tools
Lim for reparasjon
UHU Polyfoam lim
4 minutter epoxylim
Super Phatic lim
Irvine 12V starter
Irvine Flight Box
Deluxe Eze Dope